Solid Stainless Steel Construction - Heavy Gauge 304 Stainless Steel used on tank, water separator, spray reserve tank, primary coil, low-temperature coil, lid system, tank access doors and tank fittings.
Stainless Steel Primary Condensing Coil - New Copeland refrigeration system operating with R134A refrigerant
Sub-Zero Temperature Condensing Coil - Finned stainless steel condensation coil with Copeland R404A refrigeration operating to approximately -20F thus broadening the height of the solvent flash-off dwell zone for enhanced solvent containment.
Foot Activated Spray Lance System - mag-drive pump with distillate spray reservoir with Vapor Up Safety Control which requires presence of vapor to permit operation of spray wand
High Volume Condensate Water Separator - feeding spray reservoir
Digital Display Safety Control Panel - including HTC, LTC, SVC, VU, RT
WATLOW Temperature Safety Limit Controls Digital display on Control Panel; temperature set point as well as actual temperature – SVC (Safety Vapor Control), HTC (High Temperature Control), LTC (Liquid Temperature Control) and RT (Refrigeration Temperature Control)
Low-Level Float Safety System - Ensures the minimum amount of solvent in boil sump for proper system operation.
Comprehensive Indicator Light System on Control Panel Panel¡V Includes solvent low level float fault indicator lights (for easy identification of operating fault conditions). "Spray Ready" indicator light and zero coil "Defrost" indicator light, illuminated on/off switches for easy identification of system condition "Heat", "Filtration", "Main Power", "Refrigeration" and "Low-Temp Refrigeration"
Horizontal Slide Lid - for solvent containment. Optional power roll-top available.
Simple In & Out Electric Immersion Heater - "Screw-In" type elements for easy replacement.
Two Sump Access Clean-Out Doors - Boil Sump & Immersion Sump access for ease of maintenance though the clean-out door rather than over the tank top
One (1) stainless steel workbasket
Comprehensive 1-Year Manufacturer’s Warranty
ULTRA™ VS-4416 LE Operator’s Manual
Optional: Automated Basket Handling Systems with Touch Screen Controls
Horizontal-Vertical Lift (HVL) System
Part Basket 18” L x 13” W x 4” H
Features
Horizontal & Vertical Travel - Position and length of dwell at that position is PLC controlled.
Multiple Saved Part Processing Recipes - PLC Controller allows the saving of 30 separate part cleaning cycles.
Safety and Vapor Degreaser Operating Interlocks - Prevents automatic operation: if lid is not open, if heat is not operating, if system is not in full vapor reflux, or if there is lift operating system default.
Vapor Containment Enclosure - 3 side transparent enclosure on horizontal surfaces for viewing of tank operation and mechanical components.
ULTRA™ VS-4416 LE: Compatible with Non-Flammable Solvents
Simple Change over - The ULTRA™ VS-4416 LE is engineered to be compatible with a variety of solvents and in most cases a simple clean out and change of temperature settings is all that is required.
120% Freeboard — helps with vapor containment - so using chlorinated solvents like TCE, TCA, MCL and PERC is still possible.
Sub-Zero refrigeration coil - in addition to the primary refrigeration system, makes using brominated solvents like GenTech™, EnTron™ & EnTron-Aero™ or fluorinated solvents such as AeroTron™ an economical alternative.
Manual or Automated Slide-Lid - provides additional solvent containment for the new generation of fluorinated solvents like AeroTron™ and helps reduce evaporation.
Reliance Specialty Products' core business is vapor degreasing solvent cleaning. We research, develop, manufacture, and expertly support advanced solvent cleaning products and metal finishing products. We manufacture vapor degreasing solvents and low-emission NESHAP Compliant vapor degreasing equipment that provide years of quality, reliability and productivity.
