Solid Stainless Steel Construction - 1/8” Heavy Gauge 304 Stainless Steel used on tank, water separator, spray reserve tank, primary coil, low-temperature coil, lid system, tank access doors and tank fittings.
Sub-Zero Temperature Condensing Coil - Finned stainless steel condensation coil with Copeland R404A refrigeration operating to approximately -20F thus broadening the height of the solvent flash-off dwell zone for enhanced solvent containment.
Hand-Operated Spray Lance System - Mag-drive pump with distillate spray reservoir with Vapor Up Safety Control which requires presence of vapor to permit operation of spray wand.
High Volume Condensate Water Separator - feeding spray reservoir
Ultrasonic Power – 1500 Watts @ 40 kHz - field replaceable submersible transducers and plug in external ultrasonic generator for easy servicing. Provides for both Input adjustment & sweep frequency adjustment.
Ultrasonic Immersion Sump filtration recirculation system with mag-drive pump and pressure gauge for indicating when to replace filter.
Digital Display Safety Control Panel with WATLOW Temperature Limit Controls Digital display on Control Panel; temperature set point as well as actual temperature – SVC (Safety Vapor Control), HTC (High Temperature Control), LTC (Liquid Temperature Control) and RT (Refrigeration Temperature Control)
Low-Level Float Safety System - Ensures the minimum amount of solvent in boil sump for proper system operation.
Water Flow Safety Control & Water Flow Temperature Control - ensures proper interaction between chiller and vapor degreaser.
Comprehensive Indicator Light System on Control Panel - Includes solvent low level float fault indicator lights (for easy identification of operating fault conditions). “Spray Ready” indicator light and zero coil “Defrost” indicator light, illuminated on/off switches for easy identification of system condition “Heat”, “Filtration”, Main Power”, “Refrigeration” and “Low-Temp Refrigeration”.
Horizontal Slide Lid - with two sections that meet at the middle of the tank sliding to the left and sliding to the right. Optional power roll-top available.
Two-Level Heat - for expedited start up and additional vapor condensation.
Electric Immersion Heat - Elements are mounted on Clean-Out Door for easy removal and maintenance. Elements are 216L Stainless Steel.
Comprehensive 1-Year Manufacturer’s Warranty
ULTRA™ 7216 LE Operator’s Manual
ULTRA™ 7216 LE Benefits
Simple engineering and stoutness of design for durability and ease-of-maintenance
Excellent training - start-up, shut down, maintenance and good solvent cleaning work practices
Easy to support in the field with accessible heating elements, clear temperature read-outs, sophisticated indicator light system, and updated refrigeration systems using standard refrigerant
Cost effective operation and maintenance
Compact footprint
Effective with a variety of non-flammable solvents, including chlorinated, brominated & fluorinated
State-of-the-art engineering based on a best practices for simplicity, field supportability and reliability
Minimal Solvent Emissions & Reduced Operating Costs due to NESHAP Compliant coils
ULTRA™ 7216 LE—Electrical Panel with sophisticated temperature display & indicator light system
ULTRA™ 7216 LE Options
Manual horizontal slide lid
Power Pump-Out of Boil and/or Immersion Chamber for easy removal of solvent
Stainless Steel Basket Crash Guards
Solvent Containment Spill Tray
Increased Ultrasonic Power
Boil Sump Filtration
Boil Chamber Grate to suspend part basket above boiling solvent
Upgraded Filtration System for high volume of contaminate
Custom baskets
Choice of vapor degreasing solvent including EnTron™, EnTron-Aero™, GenTech™ & AeroTron™
ULTRA™ 2424 LE: Compatible with Non-Flammable Solvents
Simple Change over - The ULTRA™ 7216 LE is engineered to be compatible with a variety of solvents and in most cases a simple clean out and change of temperature settings is all that is required.
120% Freeboard — helps with vapor containment - so using chlorinated solvents like TCE, TCA, MCL and PERC is still possible.
Sub-Zero refrigeration coil - in addition to the primary refrigeration system, makes using brominated solvents like GenTech™, EnTron™ & EnTron-Aero™ or fluorinated solvents such as AeroTron™ an economical alternative.
Manual or Automated Slide-Lid - provides additional solvent containment for the new generation of fluorinated solvents like AeroTron™ and helps reduce evaporation.
Reliance Specialty Products, Inc.
OEM Manufacturer of Vapor Degreasing Equipment and Vapor Degreasing Solvents
Comprehensive Vapor Degreasing Solution Provider - Reliance is the only industry player that manufactures both vapor degreasing solvent and vapor degreasing equipment. Our manufacturing expertise combined with our years of working with a variety of solvent cleaning processes make us able to support our customers in a variety of practical ways.
Years of Experience - We have a unique history of developing solvents and manufacturing vapor degreasing equipment for precision aerospace, electronics and optics customers. Reliance serves many industries. Find out more about how we can help yours.