Vapor Degreasing Equipment accessories

Piston hand pump with stainless steel stem and solvent compatible components.

Chemical resistant hose with ball valve on at discharge to shut off flow.

Standard length hose of 6 feet.

Treaded drum bung bushing for support of pump stem.

3/8" Pump Discharge.

41" stem length dividable into 3 separate treaded sections for shorter depth requirements.

NOTE: Only for non-flammable vapor degreasing solvents.

TB series drum pump system with Stsainless steel stem and solvent compatible components is equipped with:

A 115V or 230V, single phase 50/60 Hz electric motor.

12 ft. of electrical cord.

Circuit breaker with manual reset.

Internal cooling fan and built-in on/off switch.

Stainless steel neck construction.

10 ft. of hose.

Filter density of 10 micron or 25 micron

Case of 30 count 10 micron filters

Case of 30 count 25 micron filters

Stainless Steel Spill Tray holds 100% of the solvent capacity of the immersion chamber (largest chamber of the vapor degreasing system).

Placed under the vapor degreasing unit to ensure containment of any solvent that spills from system during routine maintenance.

Boil chamber grate made of stainless steel angled to suspend the part basket above boiling solvent in the boil chamber.

2 Sizes Available

LONG Handle: 35" long.

Basket construction is stainless steel rod and ½" stainless mesh on the basket walls.

Small:
ULTRA™ 1212 size, long handle,
10"L x 8"W x 4"deep

Medium:
ULTRA™ 2012/2216 size, long handle
18"L x 10"W x 4"deep

2 Sizes Available

SHORT Handle: 3" long

Basket construction is stainless steel rod and 1/2" stainless mesh on the basket walls.

Small:
ULTRA™ 1212 size, short handle
10"L x 8"W x 4"deep

Medium:
ULTRA™ 2012/2216 size, short handle
18"L x 10"W x 4"deep