Aerospace Vapor Degreasing Solvent:
AeroTron-AV

AeroTron-AV is a powerful, advanced next-generation vapor degreasing solvent that provides precision cleaning with the pedigree required for the aerospace industry. AeroTron-AV is non-flammable and specially formulated for metal, plastic and elastomer compatibility in aerospace cleaning. Confidently use it to replace Novec™ 72DE, 73DE and 72DA , 73DA. It is also a direct replacement for chlorinated solvents: TCE and PERC and nPB-based solvents.

Advantages of AeroTron™-AV

  • Conforms to Boeing specifications: BSS 7424, ARP 1755B,
    ADS-61S-PRF, PWA 33604 Hot Corrosion and PWA 36604 Stress Corrosion:

  • Aerospace Conformance Testing Data

  • US-EPA SNAP approved (Significant New Alternative Policy)

  • Approved to ASTM-D-6368

  • Drop-in replacement for TCE, PERC and nPB

  • Non-flammable—no flash point

  • Distillable

  • Highly stable in the presence of water

  • Does not require acid testing or boosting

  • 116°F boiling point

  • High solvency power

  • Always in stock and ready to ship

  • Economical Solvent Disposal Program available

Technical/Physical Properties AeroTron-AV
Specific Gravity, 25/25°C 1.28
Specific Heat, 25°C, cal/g 0.26
Latent Heat, cal/g 67
Viscosity, 25°C, cps 0.48
Vapor Pressure, atm 0.53
Vapor Density (Air =1) 5.2
Water Solubility (g/AV ml) 0.15
Surface Tension (dyn/cm) 19.5
Flammability Limits LEL/UEL 7% - 14.0%
Performance Properties AeroTron-AV
Boiling Point 116° F / 47° C
Flash Point, by ASTM D93-TCC None
Evaporation Rate Quickly & Completely
Azeotropic Composition for Vapor Degreasing Yes
Broad Metal Compatibility Yes
Hydrolysis Highly Stable
Distillable Yes
Kauri Butanol Value 97
Non-Volatile Residue < 10 ppm
Water Content, max 50 ppm
Odor Mild Ether
Environmental, Regulatory & Health Profile AeroTron-AV
US-EPA SNAP Program Approved for Solvent Cleaning
Global Warming Potential (GWP) All components deemed acceptable by US-EPA SNAP Program—No phase out pending
Ozone Depletion Potential (ODP) 0
Volatile Organic Compound (VOC) > 75%
NESHAP—Halogenated Solvent Cleaning Regulations Not Regulated
Transportation Not regulated for transportation in 1, 5, 30 & 55 gallon containers
IARC Cancer Classification None – Not Listed
Manufacturer’s Overall Workplace Exposure Guideline 150 ppm—8 hour TWA; 300 ppm—15 minute ceiling (see SDS for further details)

Ideal Drop-In Replacement for Chlorinated and Bromiated Solvents:

Trichloroethylene (TCE), n-Propyl Bromide (nPB) and Perchloroethylene (Perc)

AeroTron™-AV is a drop-in replacement for TCE, PERC, MC and nPB in aerospace vapor degreasing and ultrasonic cleaning. The physical properties (no flash point, azeotropic, 116°F boiling point, high solvency power, stability and easy distillation) make AeroTron™-AV ideal for replacing harsher solvents.

Excellent for Vapor Degreasing and Ultrasonic Cleaning

  • No special equipment modifications required

  • Health and safety upgrade from nPB, TCE, Perc and MC

  • Use as a direct, drop-in replacement in your vapor degreaser

  • Easy to switch over to AeroTron-AV

  • Excellent for use in the ULTRA Units

AeroTron-AV is Cost Effective

We recognize that the total cost of cleaning is more than just the cost of the solvent. That is why with AeroTron-AV not only will you find a competitively priced product, but a full compliment of support personnel, and performance characteristics that enhance the cost effectiveness of choosing AeroTron-AV:

Reliance offers exceptional customer service