ULTRA™ VS-5 LE Vapor Degreaser - Reliance Specialty Products

Model VS-5 LE

ULTRA™ VS-5 - Front View

ULTRA™ VS-5 - Side View

Water Separator - Modular

Spray Tank - Modular

Maintenance / Access Door: Heating Elements mounted on door remove as an assembly with the door for easy maintenance.

Primary and Sub-Zero Condensation System with Basket Crash Guards (Note, hand spray wand is in the corner. Installed spray manifolds are available.)

Rear View of System with Roll Top

Electrical Panel and Control Panel: Individual Watlow Safety Controls on Door with Operator Lock-out Feature

❮ ❯

ULTRA™ VS-5 LE Unit Specifications
Dimensions
Vapor Cleaning Zone	60”L x 24”W x 24” Deep
Optional Vapor Zone Widths	24”, 30”, 36”, 42”, or 48” Wide
Optional Vapor Zone Depths	24”, 30”, 36”, 42”, or 48” Deep
Footprint Dimensions	90”L x 72”W x 72” High (with feet)
Features
Vapor Cleaning	Vapor Cleaning Zone above Boil Tank and Ultrasonic Tank
Spray Cleaning	Hand Spray Wand and Large Spray Reserve Tank
Filtration of Boil Tank	Optional Filtration
Boil Tank Access Door	Large Access Door System
Spray Wand	Yes; Optional Spray Manifolds
Solvent Containment
NESHAP Compliant Features	Yes
Primary Condensing Coil	(External Chilled) Stainless Steel
Low-Temp Freeboard Condensation Coil	Refrigerated Finned Stainless Steel operating at -10F to -20F
Freeboard Ratio	> 100%
Horizontal Slide Lid	Manual or Automated
Watlow Solvent Safety and Temperature Controls	HTC, LTC, SVC, VU, RT and Low-Level Float
Monitoring Vapor Degreaser’s Correct Operating Condition	Comprehensive Indicator Light System and Temperature Displays
Operating Requirements
Solvent Operating Requirement	71 Gallons
Typical Electrical Service	480V / 3 Phase

ULTRA™ VS-5 LE Low Emission Features

Vapor degreaser safety panel — Simple Control Safety Panel

Vapor degreaser hand operated spray lance system — Hand Operated Spray Lance System

Vapor degreaser sub-zero coils — Sub-Zero Coils Operating at
–20F for Enhanced Containment

Vapor degreaser heating elements — Heating Elements Mounted
on Clean–Out Door

NESHAP Compliant - Low-Emission Vapor Degreasing System
Solid Stainless Steel Construction - 1/8” Heavy Gauge 304 Stainless Steel used on tank, water separator, spray reserve tank, primary coil, low-temperature coil, lid system, tank access doors and tank fittings.
Stainless Steel Primary Condensing Coil - Requires chiller or facility chilled water.
Sub-Zero Temperature Condensing Coil - Finned stainless steel condensation coil with Copeland R404A refrigeration operating to approximately -20F thus broadening the height of the solvent flash-off dwell zone for enhanced solvent containment.
Hand-Operated Spray Lance System - Mag-drive pump with distillate spray reservoir with Vapor Up Safety Control which requires presence of vapor to permit operation of spray wand.
High Volume Condensate Water Separator - feeding spray reservoir
Digital Display Safety Control Panel with WATLOW Temperature Limit Controls Digital display on Control Panel; temperature set point as well as actual temperature – SVC (Safety Vapor Control), HTC (High Temperature Control), LTC (Liquid Temperature Control) and RT (Refrigeration Temperature Control)
Low-Level Float Safety System - Ensures the minimum amount of solvent in boil sump for proper system operation.
Water Flow Safety Control & Water Flow Temperature Control - ensures proper interaction between chiller and vapor degreaser.
Comprehensive Indicator Light System on Control Panel - Includes solvent low level float fault indicator lights (for easy identification of operating fault conditions). “Spray Ready” indicator light and zero coil “Defrost” indicator light, illuminated on/off switches for easy identification of system condition “Heat”, “Filtration”, Main Power”, “Refrigeration” and “Low-Temp Refrigeration”.
Horizontal Slide Lid - optional two-part lid with sections that meet at the middle of the tank sliding to the left and sliding to the right. Optional power roll-top available.
Two-Level Heat - for expedited start up and additional vapor condensation.
Electric Immersion Heat - Elements are mounted on Clean-Out Door for easy removal and maintenance.
One (1) stainless steel workbasket
Comprehensive 1-Year Manufacturer’s Warranty
ULTRA™ VS-5 LE Operator’s Manual

ULTRA™ VS-5 LE Benefits

Simple engineering and stoutness of design for durability and ease-of-maintenance

Excellent training - start-up, shut down, maintenance and good solvent cleaning work practices

Easy to support in the field with accessible heating elements, clear temperature read-outs, sophisticated indicator light system, and updated refrigeration systems using standard refrigerant

Cost effective operation and maintenance

Compact footprint

Effective with a variety of non-flammable solvents, including chlorinated, brominated & fluorinated

State-of-the-art engineering based on a best practices for simplicity, field supportability and reliability

Minimal Solvent Emissions & Reduced Operating Costs due to NESHAP Compliant coils

ULTRA™ VS vapor degreaser electrical panel

ULTRA™ VS—Electrical Panel
with sophisticated temperature display
& indicator light system

ULTRA™ VS-5 LE Options

Electric horizontal slide lid

Increased width or depth increases vapor zone

Spray Manifolds

Power Pump-Out of Boil and/or Immersion Chamber for easy removal of solvent

Stainless Steel Basket Crash Guards

Solvent Containment Spill Tray

Boil Sump Filtration

Boil Chamber Grate to suspend part basket above boiling solvent

Upgraded Filtration System for high volume of contaminate

Additional baskets

Choice of vapor degreasing solvent including EnTron™, EnTron-Aero™, GenTech™ & AeroTron™

ULTRA™ VS with chiller

ULTRA™ VS-5 LE: Compatible with Non-Flammable Solvents

Simple Change over - The ULTRA™ Model VS Degreasers are engineered to be compatible with a variety of solvents and in most cases a simple clean out and change of temperature settings is all that is required.
120% Freeboard and NESHAP Compliant Features — helps with vapor containment - so using chlorinated solvents like TCE, MC and PERC is still possible.
Sub-Zero refrigeration coil - in addition to the primary refrigeration system, makes using brominated solvents like GenTech™, EnTron™ & EnTron-Aero™ or fluorinated solvents such as AeroTron™ an economical alternative.
Manual or Automated Slide-Lid - provides additional solvent containment for the new generation of fluorinated solvents like AeroTron™ and helps reduce evaporation.

Let Our Experts Assist You In Your Project

Reliance is a total vapor degreasing solutions provider

Reliance Specialty Products' core business is vapor degreasing solvent cleaning. We research, develop, manufacture, and expertly support advanced solvent cleaning products and metal finishing products. We manufacture vapor degreasing solvents and low-emission NESHAP Compliant vapor degreasing equipment that provide years of quality, reliability and productivity.

Ready to Help
Responsive
Reliable

Ultrasonic Vapor Degreasing System

Model VS-5 LE

ULTRA™ Model VS-5 LE Features:

ULTRA™ VS-5 LE Low Emission Features

ULTRA™ VS-5 LE Benefits

ULTRA™ VS-5 LE Options

ULTRA™ VS-5 LE: Compatible with Non-Flammable Solvents

Let Our Experts Assist You In Your Project

Solvents

Equipment

Tutorials

About Us