Solid Tank Construction - Heavy Gauge 304 Stainless Steel
Stainless Steel Primary Condensing Coil - New Copeland refrigeration system operating with R134A refrigerant
Sub-Zero Temperature Condensing Coil - Finned stainless steel with Copeland R404A refrigeration system operating to approximately -20F to supplement primary condensation system. Includes defrost cycle, low-temperature condensing coil with condensate trough
Foot Activated Spray Lance System - mag-drive pump with distillate spray reservoir with Vapor Up Safety Control which requires presence of vapor to permit operation of spray wand
High Volume Condensate Water Separator - feeding spray reservoir
Digital Display Safety Control Panel - including HTC, LTC, SVC, VU, RT
WATLOW Temperature Safety Limit Controls with digital display on Control Pan-el; temperature set point as well as actual temperature – SVC (Safety Vapor Con-trol), HTC (High Temperature Control), LTC (Liquid Temperature Control) and RT (Refrigeration Temperature Control)
Solvent Low-Level Float Safety
Control panel with solvent low level float fault indicator lights (for easy identification of operating fault conditions). “Spray Ready” indicator light and zero coil “Defrost” indicator light, illuminated on/off switches for easy identification of system condition “Heat”, “Filtration”, Main Power”, “Refrigeration” and “Low-Temp Refrigeration”
Manual Horizontal Slide Lid - for solvent containment
Casters - for easy movement
Electric Immersion heat - "Screw-In" Type Elements for easy replacement
Two Sump Access Clean-Out Doors - Boil Sump & Immersion Sump access for ease of maintenance though the clean-out door rather than over the tank top
One (1) stainless steel workbasket
Comprehensive 1-Year Manufacturer’s Warranty
ULTRA™ VS-2 LE Operator’s Manual
ULTRA™ VS-2 LE Benefits
Simple engineering and stoutness of design for durability and ease-of-maintenance
Excellent training - start-up, shut down, maintenance and good solvent cleaning work practices
Easy to support in the field with accessible heating elements, clear temperature read-outs, sophisticated indicator light system, and updated refrigeration systems using standard refrigerant
Cost effective operation and maintenance
Effective with a variety of non-flammable solvents, including chlorinated, brominated & fluorinated
State-of-the-art engineering based on a best practices for simplicity, field supportability and reliability
Minimal Solvent Emissions & Reduced Operating Costs due to NESHAP Compliant coils
ULTRA™ VS-2 LE Options
Increased tank depth for increased vapor zone
Electric horizontal slide lid
Solvent Containment Spill Tray
Choice of vapor degreasing solvent including EnTron™, EnTron-Aero™, GenTech™ & AeroTron™
ULTRA™ VS-2 LE: Compatible with Non-Flammable Solvents
Simple Change over - The ULTRA™ VS-2 LE is engineered to be compatible with a variety of solvents and in most cases a simple clean out and change of temperature settings is all that is required.
120% Freeboard—helps with vapor containment - so using chlorinated solvents like TCE, TCA, MCL and PERC is still possible.
Sub-Zero refrigeration coil - in addition to the primary refrigeration system, makes using brominated solvents like GenTech™, EnTron™ & EnTron-Aero™ or fluorinated solvents such as AeroTron™ an economical alternative.
Manual or Automated Slide-Lid - provides additional solvent containment for the new generation of fluorinated solvents like AeroTron™ and helps reduce evaporation.
Reliance Specialty Products' core business is vapor degreasing solvent cleaning. We research, develop, manufacture, and expertly support advanced solvent cleaning products and metal finishing products. We manufacture vapor degreasing solvents and low-emission NESHAP Compliant vapor degreasing equipment that provide years of quality, reliability and productivity.