Vapor Degreasing Equipment Accessories

• Piston Hand Pump with Stainless Steel Stem and solvent compatible components.
• Chemical resistant hose with ball valve on at discharge to shut off flow.
• Standard length hose of 6 feet.
• Treaded drum bung bushing for support of pump stem.
• 3/8" Pump Discharge.
• 41" stem length dividable into 3 separate treaded sections for shorter depth requirements.
• NOTE: Only for non-flammable vapor degreasing solvents.

PART: DP-100:
Pump, Hose and Ball Valve Closure:
Contact Us to Purchase

• A 115V or 230V, single phase 50/60 Hz electric motor.
• 12 ft. of electrical cord.
• Circuit breaker with manual reset.
• Internal cooling fan and built-in on/off switch.
• Stainless steel neck construction.
• 10 ft. of hose.

Contact Us to Purchase

• Filter density of 10 micron or 25 micron.
• Case of 30 count 10 micron filters or
• Case of 30 count 25 micron filters

Contact Us to Purchase

• Stainless Steel Spill Tray holds 100% of the solvent capacity of the immersion chamber (largest chamber of the vapor degreasing system).
• Placed under the vapor degreasing unit to ensure containment of any solvent that spills from system during routine maintenance.

Contact Us to Purchase

Contact Us to Purchase

• 2 Sizes
• LONG Handle: 35" long.
• Basket construction is stainless steel rod and ½" stainless mesh on the basket walls.
  • Small:
    ULTRA1212 size
    long handle
    10"L x 8"W x 4"deep
  • Medium:
    ULTRA2012/2216 size
    long handle
    18"L x 10"W x 4"deep

Contact Us to Purchase

• 2 Sizes
• SHORT Handle: 3" long.
• Basket construction is stainless steel rod and 1/2" stainless mesh on the basket walls.
  • Small:
    ULTRA1212 size
    short handle
    10"L x 8"W x 4"deep
  • Medium:
    ULTRA2012/2216 size
    short handle
    18"L x 10"W x 4"deep

Contact Us to Purchase