No Chlorine and No Bromine:
AeroTron-ce
AeroTron™-CE is a powerful, advanced solvent chemistry that effectively removes a variety of contaminants from metal parts—without the detrimental chlorine and bromine.
Increasingly, companies need vapor degreasing solvents that clean effectively, but do not contain chlorine or bromine. AeroTron™-CE fills the need. Our AeroTron™-CE does not contain 1,2 Trans Dichloroethylene and it does not contain nPB or any brominated components while being a good cleaner for vapor degreasing and ultrasonic immersion. AeroTron™-CE is specially formulated to remove the contaminants manufacturers have as a part of metal fabrication and industrial component manufacture. Another added advantage: <10% VOC.
AeroTron™-CE - contains no 1,2 Trans Dichloroethylene and No Bromine
Advantages of AeroTron™-CE
Plastic safe
No chlorine and no bromine in formulation (contains no 1,2 Trans Dichloroethylene)
No speciall NESHAP reporting required
Drop-In replacement for TCE, PERC and nPB
US-EPA SNAP approved
(Significant New Alternative Policy)< 10% VOC
Non-flammable
Use in your current vapor degreaser or current cleaning operation
Recyclable / Distillable
Easily removes flux residue, polar/non-polar contaminants, and hydrocarbons
No-hydrolysis reaction—
Does not require acid testing or boosting
| Technical/Physical Properties | AeroTron-CE |
| Specific Gravity, 25/25°C | 1.28 |
| Specific Heat, 25°C, cal/g | 0.27 |
| Latent Heat, cal/g | 67 |
| Viscosity, 25°C, cps | 0.43 |
| Vapor Pressure, atm | 0.52 |
| Vapor Density (Air =1) | 5.2 |
| Water Solubility (g/AV ml) | 0.15 |
| Surface Tension (dyn/cm) | 16.3 |
| Flammability Limits LEL/UEL | None |
| Performance Properties | AeroTron-CE |
| Boiling Point | 129° F / 54° C |
| Flash Point, by ASTM D93-TCC | None |
| Evaporation Rate | Quickly & Completely |
| Azeotropic Composition for Vapor Degreasing | Yes |
| Broad Metal Compatibility | Yes |
| Hydrolysis | Highly Stable |
| Distillable | Yes |
| Kauri Butanol Value | 45 |
| Non-Volatile Residue | < 10 ppm |
| Water Content, max | 50 ppm |
| Odor | Mild |
| Environmental, Regulatory & Health Profile | AeroTron-AV |
| US-EPA SNAP Program | Approved for Solvent Cleaning |
| Global Warming Potential (GWP) | All components deemed acceptable by US-EPA SNAP Program—No phase out pending |
| Ozone Depletion Potential (ODP) | 0 |
| Volatile Organic Compound (VOC) | < 10 VOC |
| NESHAP—Halogenated Solvent Cleaning Regulations | Not Regulated |
| Transportation | Not regulated for transportation in 1, 5, 30 & 55 gallon containers |
| IARC Cancer Classification | None – Not Listed |
| US EPA SNAP Program Exposure Guideline | 50 ppm—8 hour TWA; 150 ppm—15 minute ceiling (see SDS for further details) |
-
-
-
Reliance also manufactures the ULTRA™ line of vapor degreasing equipment to provide our customers a simple comprehensive cleaning package for your company.
LEARN MORE
Excellent for Vapor Degreasing and Ultrasonic Cleaning
No special equipment modifications required
Health and safety upgrade from nPB, TCE, Perc and MC
Use as a direct, drop-in replacement in your vapor degreaser
Easy to switch over to AeroTron™-CE
AeroTron™-CE is Cost Effective
We recognize that the total cost of cleaning is more than just the cost of the solvent. That is why with AeroTron™-CE not only will you find a competitively priced product, but a full compliment of support personnel, and performance characteristics that enhance the cost effectiveness of choosing AeroTron™-CE.
